The new JCC Fusion X Combo unit is here! Three units in one!

The FusionX, friction rollover automatic car wash system is designed around the cleaning success of the Water Wizard 2.0 high pressure automatic car wash stystem. Which is one of the components of the FusionX car wash friction system. The high pressure wash in this system includes all the features and benefits of a complete Water Wizard 2.0 unit. We’ve taken the durability factor of the stainless frame and added three (3) soft touch brushes and an optional wheel brush. Customers can choose any type of wash they desire, soft touch only, high pressure only or any combination thereof according to the wash cycles the operator has created.

Features: • Rollover Design Mounted on Railroad Style Gantry Tracks • Stainless Steel Frame and Gantry • (3) Three Soft Touch Brushes • Water Wizard 2.0 High Pressure Wash W/Scrubbing Action Nozzles • Contours to Height and Length of the Vehicle • Operator Friendly Totally Programmable Wash Cycles • Zero Degree Oscillating Nozzle in Top HP Wash Boom • High Pressure Rocker Panel Sprayers On-board • High Pressure Undercarriage Spray System • SS Scrolling Message Sign - Gantry Mounted • SS “Please Wait” and “Enter Now” Sign • Cat 3535 Pump • Automatic Chemical Mixing System • Independent Delivery Manifold for Presoak and Spot Free • Manual Controls for Gantry Operation • Web Enabled for Complete Remote Access to System Controls Performance Options: • Low Pressure/Hot Wax System • Magic of TripleShine • Foaming Tire Cleaner Applicators On-board • Presoak Heater System • Two Step Presoak System • Circulating Presoak System • Wheel Brush W/ 3 Hi Pressure Nozzles Each • Zero Degree Oscillating Nozzles on Rocker Panel Sprayers • Zero Degree Oscillating Nozzles on Rocker Panel Sprayers and Side Oscillators • Winter Wizard Freeze Control System The FusionX incoming electrical requires two electrical connections into the main disconnect switch. The connections go into the Electrical Control Center and hook up to the Safety Disconnect Switch, located on the upper right. The connection goes into the top of the switch. The 120 VAC hot wire goes into the auxiliary contact on the left side of the switch. The Neutral terminal is located directly left of the auxiliary contact. The amperage requirements for the Water Wizard are explained under “Electrical Required” below: Electrical Required: • The FusionX incoming electrical: • 125 Amp, 3ph , 208/230V ( 68 Amp Actual Draw ) Fusible Disconnect Switch w/125 Amp Dual Element Fuses • 20Amp, 1 Pole Breaker, 120V (10 Amp Actual Draw) Optional Hot Wax System: • 30 Amp, 3ph, 208/230V Optional Water Tank Heater (5KW) • 20 Amp, 3ph, 208/230V Water Line Required: • 1” (26mm) Water - Min. Pressure 40 psi (2.75bar) - Max. 60 psi (4.5 bar) Max Flow Rate: 32 gpm (122 lpm) Dimensions: • Pump Plant: 30”wide X 60”long X 70”high (762mm X 1524mm X 1778mm) • Electrical Panel 29”wide X 36” high X 8” deep (736mm X 736mm X 203mm) • Gantry: 12’10” wide X 7’ deep X 9’2” high (3.91m X 2.13m X 2.79m) •Vehicle Height Clearance: 84” (2.13m) Recommended Bay Dimensions: (Contact JCC for lesser dimensions) • Length: 39' (11.89m) • Width: 16'0" (4.87m) • Height: 12’ (3.66m) • Min. Door Opening Height: 10'0"”(3.05m)